User`s guide

Chapter 5
Ins falling and Removing Slim line Drives
Removing the Drive Mounting Bracket .............
5-2
Installing a Hard Disk Drive in the Mounting Bracket .....
5-4
Setting the IDE Device Jumpers ...............
5-5
Installing the Hard Disk Drive ...............
5-6
Replacing the Bracket in the Computer ...........
5-7
Connecting the Drive Cables .................
5-8
Reconnecting the Cables to the Diskette Drive .......
5-12
Removing a Hard Disk Drive From the Mounting Bracket ...
5-13
Installing a Drive in an External Drive Bay ...........
5-15
Attaching Mounting Frames to the Drive ..........
5-16
Installing the Drive ......................
5-17
Connecting the Drive and Power Cables ..........
5-19
Removing a Drive from an External Bay .............
5-22
Chapter 6
Installing and Removing Tower Drives
Setting the Jumpers and Locating Pin 1
...........
6-3
Installing a Drive in the Front Internal Drive Bay
...........
6-4
Installing the Internal Drive
...........
6-5
Connecting the Cables to the Front Internal Drive
...........
6-6
Removing a Drive From the Front Internal Drive Bay
...........
6-8
Installing a Drive in an External Bay
...........
6-11
Removing a Drive From an External Bay...........
6-15
Installing a Drive in the Rear Internal Bracket ...........
6-17
Removing a Drive From the Rear Internal Bracket...........
6-20
Chapter 7
Troubleshooting
Identifying Your System ......
7-2
The Computer Will Not Start ......
7-4
The Computer Does Not Respond ......
7-5
Keyboard Problems ......
7-6
Mouse Problems......
7-6
Monitor Problems ......
7-7
Diskette Problems......
7-8
Diskette Drive Problems ......
7-9
Hard Disk Drive Problems ......
7-10
ix