User`s guide
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP YOUR SYSTEM
- CHAP 2-RUNNING SETUP AND INSTALLING DRIVERS
- Using SETUP
- Starting the SETUP Program
- Using the System Setup Option
- Using the Fixed Disk Setup Option
- Using the Advanced System Setup Options
- Setting the Boot Options
- Using the Extended Features Options
- Setting the Security and Anti-Virus Options
- Using the Green PC Features
- Exiting SETUP
- Post-SETUP Procedures
- Installing the IDE Drivers
- Installing Video Drivers
- Using SETUP
- CHAP 3-USING YOUR COMPUTER
- CHAP 4-INSTALLING AND REMOVING OPTIONS
- CHAP 5-INSTALLING AND REMOVING DRIVERS
- CHAP 6-TROUBLESHOOTING
- Identifying Your System
- The Computer Will Not Start
- The Computer Does Not Respond
- Keyboard Problems
- Mouse Problems
- Monitor Problems
- Diskette Problems
- Diskette Drive Problems
- Hard Disk Drive Problems
- Password Problems
- Software Problems
- Printer or Scanner Problems
- Option Card Problems
- Memory Module Problems
- Controller Problems
- External Cache Problems
- APPENDIX A SPECIFICATIONS
- CPU and Memory
- Controllers
- Interfaces
- Mass Storage
- Keyboard
- Mouse
- SETUP Program
- Power Supply
- Option Slot Power Limits
- Physical Characteristics
- Environmental Requirements
- Options Available from EPSON
- Tested Operating Environments
- System Memory Map
- Video Resolutions and Colors
- Hard Disk DriveTypes
- Drive Option Information
- DMA Assignments
- Hardware Interrupts
- System I/O Address Map
- Connector Pin Assignments
- GLOSSARY
- INDEX
The table below lists the keys you can use to perform SETUP
operations.
SETUP function keys
Key Function
Move the cursor to the next or previous modifiable option
Home or End
Move the cursor to the top or bottom of the menu
F1 or Alt H
Display a help screen describing the option currently
selected
PgDn or–
SeIect the previous value
PgUp or+or
SeIect the next value
Spacebar
F9
Supplies the factory default values for the SETUP options on
the current screen
F1O
Ignoresany changes you have made on the current
screen
Enter
Selects the current option or value
Esc or Alt X
Return to the previous screen
While you are in SETUP, the bottom of the screen lists the keys
you can press to perform specific functions.
Using the System Setup Option
When you select the System Setup option, you see the
System Setup screen. From this screen, you can set the system
time and date, define your video display type, check system
memory, and define the diskette drives.
Move the cursor to the value you want to change. Then
increase or decrease the value until you see the one you want.
Running SETUP and Installing Drivers
2-3