User`s guide

5. Remove the replacement processor from its package and
inspect the pins. If they are bent, do not install the
processor. Contact your vendor for a new one.
6. Position the processor over the socket, aligning the notched
corner with the extra hole on the socket, as shown below.
Caution
If you install the processor in the wrong orientation, you
may damage it and void your warranty.
7. Make sure the pins in the processor are directly over the
holes in the socket. Then gently push the processor straight
into the socket, pressing evenly on all sides.
If you are installing a 486 processor rather than an Intel
®
Pentium™ OverDrive™ processor, you’ll see an extra row of
holes around the outside of the socket.
Installing and Removing Options
4-25