User`s guide

When you want to remove the diskette, make sure the drive

light is off; then press the release button. Remove the diskette

and store it properly.

Caution

Never remove a diskette, reset the computer, or turn it off

while a diskette drive light is on. You could lose data. Also,

remove all diskettes before you turn off the computer.

Stopping a Command or Program

You may sometimes need to stop a command or program while

it is running. If you want to stop an MS-DOS command or

program, try one of the following

Press Pause

Press Ctrl C

Press Ctrl Break.

If you are using another operating system, press

Ctrl Alt Del;

then follow the instructions on your screen.

If these methods do not work, you may need to reset the

computer.

Note

Do not turn off the computer to exit a program or stop a

command unless you have to, because the computer clears

any data you did not save.

Using Y

r Computer

3-9