User`s guide

To enable the anti-virus feature, follow these steps:
1. Select the Anti-Virus icon.
2. Select Enabled.
The system displays the following message when it detects an
attempt to format any cylinder, head, or sector of any hard disk
drive:
Format ! !
Possible VIRUS: Continue (Y/N) ?
The system displays the following message when it detects an
attempt to write to the boot sector of the hard disk drive.
Boot Sector Write ! ! !
Possible VIRUS: Continue (Y/N) ?
If you do not intend to format the hard disk drive or write to
the boot sector, enter
Y to prevent the introduction of a
computer virus.
Using SETUP Defaults
Use the options in the Default window to reset all the SETUP
values to one of the following sets of defaults:
Original—Returns to the original, factory-installed values.
Optimal—Loads the values that should optimize system
performance. (If CMOS RAM is corrupted, the optimal
settings are loaded automatically.)
Fail- saf e—Loads the most conservative values to
produce the most stability. Use this option as a diagnostic
aid if the system behaves erratically.
2-16 Running SETUP and Installing Drivers