User`s guide

If you have a drive connected to the secondary IDE interface,

select the Number of HDD/CD in 2nd connector

option.

5. Select one of the following options to correspond to the

drives you have connected to the secondary IDE interface.

Option Description

None No devices connected to the secondary IDE

interface

HDD (+CD) One hard disk drive and one CD-ROM drive

IDE CD One CD-ROM drive

2 HDDs Two hard disk drives

6. If you select something other than None, you can enable

the secondary IDE interface (

IDE Sec. Master and

IDE Sec.

Slave) options. Repeat steps 1 and 2 for each

drive.

Setting Power Management Options

When you select the Power Mgmt icon from the Setup

window, you see the Power Management Setup window. The

options in this window let you control the computer’s

power-saving features.

The following table describes the Power Management options.

Power Management options

Option Settings Description

Power Disabled Enables or disables the computer’s

Management Enabled * power-saving feature; you must enable

Mode Select this option to set the rest of the options

described in this table

Running SETUP and Installing Drivers 2-9