User`s manual

provided below.

Format:

char1=char2=char3=escape character (S2)

e.g.,

DTE: +++AT<CR>

DCE: OK

NOTE:

TIES requires that the three-character escape sequence be

contiguous and not repeated. The character immediately pre-

ceding the first character of the three-character sequence cannot

be the same as the escape character. Therefore, ‘+++AT<CR>’

is valid, but ‘++++ AT<CR>’ is not.

2.5 Result Codes

Basic Response Codes (\V0)

Numeric Code

Verbose Code

CONNECT

RING

NO CARRIER

ERROR

CONNECT 1200

NO DIAL TONE

BUSY

2 - COMMAND REFERENCE