User`s manual

\Z Switch to Normal Mode

During an MNP link, the modem will disconnect the link (exit error correction/

data compression) and change to narmal mode, without disconnecting the modem-

to-modem connection.

2.2.c Commands Preceded by %

%An

Set Auto-reliable Fallback Character

In auto-reliable mode (\N3), with auto-reliable fallback character enabled (\C2),

receipt of the fallback character from the line during the V.42 detection phase will

cause to modem to switch to normal mode. This allows a remote user with a non-

V.42 modem to connect immediately with a V.42 modem, A space or carriage

return is usually chosen for the fallback character.

n=0-127 (ASCII character)

%Cn

MNP 5 Data Compression Control

This command controls whether the data sent during the MNP frames is com-

pressed using MNP Class 5 compression standard. MNP 5 data compression can

improve throughput by as much as 150%

%C0

No compression.

%C1

MNP Class 5 compression. (default)

2 - COMMAND REFERENCE