User`s manual

2.2b Commands Preceded by\

\An

Maximum MNP Block Size

Sets

maximum block size for MNP connections. Use this command to transmit

smaller blocks of data in a reliable link connection,

\A0

Sets maximum block size to 64 characters.

\A1

Sets maximum block size to 128 characters.

\A2

Sets maximum block size to 192 characters.

\A3

Sets maximum block size to 256 characters

(default)

\Bn Transmit Break

This command causes the modem to send a break (Attention signal), for a duration

specified by ’n’, to the remote modem. When n = 0, the default break length is used.

n= 0-9

Break length in 100 msec.

\Cn

Set Auto-reliable Buffer (requires a license from Microcom ®

In auto-reliable mode (\N3), this command determines the fallback method and

enables data buffering. The settings for this command are used by the modem

during the V.42 detection phase.

2 - COMMAND REFERENCE