User`s manual

&Wn

Store the Current Configuration to Nonvolatile RAM

&W0 Writes the current active configuration to

profile 0 in nonvolatile RAM. (default)

&W1

Writes the current active configuration to

profile 1 in nonvolatile RAM.

&Yn

Select the Default Profile

&Y0

Uses profile 0 on power-up. (default)

&Y1 Uses profile 1 on power-up.

&Zn

Store Telephone Numbers (n=0 to3)

&Zn Stores one of four dial strings (including a telephone number) of up to 38 dig-

its in nonvolatile RAM.

For example: to store the telephone number 002852117 to RAM location 1, issue

the following command:

Command: AT&Z1=002852117 <CR>

COMMAND REFERENCE - 2