User`s guide

Commands in the CONFIG.SYS file
Card Soft may have added some of the following commands to
your CONFIG.SYS file. If you modify this file yourself, make
sure you save it and restart your computer.
CONFIG.SYS commands
Command
Function
devicehigh=c:\cardsoft\<socket
Commands necessary for CardSoft
services driver>*
to support fax/modem and
application cards; other types of
devicehigh=c:\cardsoft\cs.exe
cards may require the MTD driver
(see the documentation that
devicehigh=c:\cardsoff\csalloc.exe
came with your card for
c:\cardsoft\csalloc.ini
information); contains additional
commands for specific drivers
devicehigh=c:\cardsoft\cardid.exe
devicehigh=c:\cardsoft\atadrv.exe
Provide support for ATA drive cards
and ATA flash cards; install the
devicehigh=c:\cardsoft\mtddrv.exe
atadrv.exe command before the
sramdrv or mtddrv command
devicehigh=c:\cardsoft\mtsram.exe
Provide support for SRAM cards
devicehigh=c:\cardsoft\mtddrv.exe
device=c:\dos\emm386.exe
Excludes the memory range
x=d000-dfff
D000-DFFF
install=c:\cardsoft\cs_apm.exe
If your system conserves battery life
using the Advanced Power
Management driver, allows
CardSoft to handle the power
management cycles
* This driver depends on the PCMCIA controller in your system.
Note
PCMCIA software may be installed in C:\CARDWIZ\ or
C: \CARDSOFT\
Using CardSoft 3-13