User`s guide

If you need to change the resources available to your system,
follow these steps:
1. Move your cursor to the value you want to change in the
fields along the bottom of the screen and select Edit. You
see an Edit Options screen.
2. Select Add New, Change, or Delete.
3. If you selected Add New or Change, the screen displays
the acceptable range of values and allows you to include or
exclude the resource and identify it as shared or reserved.
Make your changes and select
OK.
If you select Delete, the screen displays the resource you
selected. Select
OK to delete it.
4. Select OK again; then select Save to save your
configuration changes.
Changing the Display for the Configuration Utility
You can assign a color, monochrome, or LCD display mode for
the Card Soft configuration utility. To change the display mode,
select the Display pull-down menu; then select Color,
Monochrome, or LCD to identify the mode you want to use.
Make sure you select a mode supported by your hardware.
When you make your selection, the screen immediately reflects
the option you have chosen.
3-8
Using CardSoft