User`s guide

Network card configuration options
Option
Function
Port*
Identifies the base l/O address (in hexadecimal)
for the network card. Except in rare cases, this
value should be between 100h and 3FFh.
IRQ*
Identifies the IRQ for the network card. Can be
any value between 3 and 15 that is available on
your computer.
Memory 1 *
Displays the value for the first memory window.**
Memory 2*
Displays the value for the second memory
window.**
Fast Token Ring***
Specifies the speed for a Token Ring card.
Enabling this option sets the Token Ring speed to
16 Megabits per second. When this option is
disabled, the Token Ring speed is 4 Megabits
per second.
* Do not change the displayed values for these options unless you have a
specific reason.
** These values must be between C000h and EF00h and are normally in the
range D000-DFFF. You only need to enter the first two characters for these
values.
*** You may not see this option on your system.
Using CardSoft 3-5