User`s guide

Using CardSoft
The PCMCIA driver and utilities, collectively called CardSoft,
help you configure and manage PC cards in the MS-DOS
environment. The CardSoft programs are located in the
CARDSOFT directory on your computer’s hard disk drive.
The following drivers and utilities are already included in the
CARDSOFT directory:
SSVADEM.EXE PCMCIA Socket Services driver
CS.EXE PCMCIA Card Services driver
CSALLOC.EXE (described below)
ATADRV.EXE Driver for ATA Type III hard disk drive cards
or flash cards
MTSRAM.EXE Driver for SRAM cards
MTDDRV.EXE Drive letter display utility for SRAM and flash
memory cards
CARDID.EXE
Driver for detecting card insertion and removal,
and for configuring the socket and card
CARDINFO.EXE Card and slot information display utility.
Note
If you are not using the type of card supported by one or
more of these programs, you can remove the driver from the
CONFIG.SYS file to free up the resources the programs use.
For example, if you did not install an ATA Type III card, you
can use the Windows Sysedit utility in the Applications
group to delete the command line containing the
ATADRV.EXE driver from the CONFIG.SYS file.
2-14 Using Your Computer