User's Manual

Running Tests
Follow these steps to run a test from the Execute menu:
1.
Press
or
to select Execute. You see the
Execute menu, such as the following:
System Board
Numeric Coprocessor
system Metmory
Diskette Drive A
Hard Disk Drive #l
Serial Port COMl
Serial Port C0M2
Printer Port LPTl
Video Adapter Test
Keyboard Test
2.
Press
or
to highlight the device you want to
test and press
. You see the Repeat prompt:
How often to repeat test? 1
3.
If you want to run the test once, press
. To run the test
more than once, type the number of times and press .
4. If there is only one test for a device, the program begins
testing immediately. If there is more than one test for the
device, you see a submenu, such as the following:
HARD DISK DRIVE(S) AND CONTROLLER CHECK MENU
1 - Seek check
2 - Write, read check
3-
Read, verify check
4
- Run all above checks
0
- Exit
Running System Diagnostics
6-5