User's Manual

Using SelecType
Interface submenu
To enter the interface submenu from the main menu, follow the
steps below:
1. Press the or button until you see the
I/F function in the
display.
2. Press the SET button to activate the menu option. (The option
starts blinking, indicating that it has been activated.)
3. If the I/F function is set to the PARALLEL option, press the
button to select the SERIAL option.
4. Press the SET button to set the SERIAL option. An asterisk (*)
appears next to SERIAL.
I/F = SERIAL*
5. Press the SET button a third time to enter the interface submenu,
where you can change options for the menu functions listed
below. (The SelecType Options section in this chapter describes
options for these functions in detail.)
BAUDI RATE
PROT
DATA BIT
PARITY
STOP BIT
ROBUST-XON
6. Use the or button to move to a function you want to
change.
Note: This submenu does not work in a loop. Pressing the
button when BAUD RATE is displayed or pressing the
button when ROBUST-XON is displayed causes you to exit the
submenu and return to the main menu.
3-16
Using the Printer