User's Manual

SelecType Overview
SelecType main menu
PAPER SIZE
COPIES
AUTO CONT
(Automatic Continue)
EMULAT I ON
Specifies the size of the paper.
Selects the number of copies to print.
I/F
(Interface)
STATUS PRT
POWER ON
DATA BUFFER
OVER LORD
BUZZER
Interface submenu
BAUD RATE
PROT
(Protocol)
DATA BIT
PARITY
STOP BIT
ROBUST-XON
Lets the printer continue printing instead
of stopping under certain error conditions.
Allows you to select the emulation mode
and enter the emulation submenus.
Allows you to set up the printer’s
interface to conform to the requirements of
your computer.
Allows you to run the status print test each
time the printer is powered on.
Selects either on line or off line mode when
the printer is powered on.
Sets the size of the data buffer in kilobytes.
Selects the data buffer overflow value.
Turns the buzzer on or off.
Sets the data transfer rate.
Selects the protocol.
Selects the number of data bits.
Selects the parity.
Selects the number of stop bits.
Turns Robust-Xon on and off.
3-8
Using the Printer