User's Manual

Connecting the Printer to Your Computer

Plug the other end of the cable into your computer.

Now that you have connected the parallel interface, see Chapter 3

for information on operating your printer.

Connecting the serial interface

If you are using the printer’s serial interface, make sure that you

have a properly shielded cable, and

that

it is the correct one for your

computer.

Follow these steps to connect the serial interface:

Turn off both

the

printer and

the

computer.

Plug the cable connector securely into

the

serial interface as

shown. (The serial interface is just to the left of the DIP switches

if you are facing the back of your printer.)

Testing and Connecting Your Printer

2-13