User's Manual

Assembling the Printer

Locate the drum unit, which you can recognize by the bright

green drum, and the cotton swab.

CAUTION: Do not expose the photosensitive drum to

light any longer (a few minutes at most). It

is recommended that you cover the drum with a soft cloth

or sheet of paper whenever drum is exposed. Also, do

not touch the surface of the drum.

Place the drum unit on a clean, smooth surface and locate the

main charger wire, which extends along the length of the green

drum inside a slot in the silver bar directly over the drum. The

wire is silver and very thin, so it is difficult to see.

CAUTION: The main charger wire is very delicate. Do not

press on it too hard or it may break. Also, never touch the

wire.

Setting Up the Printer

1-13