User's Manual

FX Emulation
Unsupported commands
The following commands are not supported in FX emulation. If sent
to the printer, they are ignored.
Command
ASCII
Cut sheet feeder operation
ESC EM
Select user-defined set
ESC %
Define user-defined characters
ESC &
Disable paper-out sensor
ESC 8
Enable paper-out sensor
ESC 9
Copy ROM into RAM
ESC :
Select justification
ESC a
Select immediate print mode
ESC i
Reverse paper feed
ESC j
Select NLQ font
ESC k
Select half-speed mode
ESC s
Select Near Letter Quality
ESC x
Unidirectional mode (1 line)
ESC <
Turn unidirectional on/off
ESC U
5-32 Printer Modes