User's Manual

FX Emulation
ASCII
Dec. Hex.
Description
Graphics
ESC *m n1 n2 42
2A
Select graphics mode
Selects graphics mode m
The total number of columns =
n1 + (n2 x 256). This command is
followed by d1 . . . dn data numbers.
Option
Alternate code
m
Single-density
ESC K
0
Double-density
ESC L
1
High-speed double-density
ESC Y
2
Quadruple density
ESC Z
3
CRT I
none
4
Plotter (1:1)
none
5
CRT II
none
6
ESC K n1 n2 75 4B Select single-density graphics
mode*
ESC L n1 n2 76 4C
Select double-density graphics
mode*
ESC Y n1 n2 89 59
Select high-speed double-density
graphics mode*
ESC Z n1 n2 90 5A Select quadruple-density graphics
mode*
* Note: The total number of columns = n1 + (n2 x 256). Each of these commands is
followed by d1 . . . dn data numbers.
ESC
A
m n1 n2 94 5E
ESC ? s m 63 3F
Select 9-pin graphics mode
m = print density (0 for single; 1 for
double). The total number of columns
= n1 + (n2 x 256). This command is
followed by d1 . . . dn data numbers.
Reassign graphics mode
Reassigns command s (K, L, Y, or Z), to
mode m (0-6). See ESC *.
Printer Modes 5-29