Specifications

Initializing the printer
When you initialize the printer, you clear the printer’s memory
and you reset all printer settings to the factory defaults. Any
downloaded fonts or SelecType settings that were changed
from the defaults are lost.
You might want to initialize the printer in the following cases:
LI You have changed the SelecType settings, but you now
want to change everything back to the factory settings.
P Another user has changed printer settings, but you prefer
to use the factory settings.
To initialize the printer:
1. Press the Menu button until you reach the CONFIG MENU.
2. Press the Item button until you reach SelecType INIT.
3. Press the Enter button. This resets the SelecType settings back
to the factory default settings.
4. Press the On Line button. If the RESET TO SAVE message
appears, press the Reset button while holding down Alt.
General Problems
Preventing paper feed and paper jam problems
If you have frequent paper feed or paper jam problems, use
this checklist of corrective measures:
P Use a higher-quality paper that is not too thin or rough.
Some types of paper require single-sheet feeding. See
Chapter 2, “Paper Handling.”
Troubleshooting and Maintenance
6-3