Specifications

Operating in GL/2 emulation
When changing to GL/2 emulation from LJ4 emulation, check
that the SelecType settings are correct for GL/2 emulation.
Some settings, such as PAGE SIZE, ORIENTATION, and STD
TRAY, might have to be changed, depending on your
document. Check also that the printer settings specific to GL/2
emulation, which are located on the GL2 MENU, are set
correctly. Plotter-specific settings, such as PEN, JOIN, and
END, are described in this chapter.
For all other SelecType settings, see Chapter 4. Be aware,
however, that the descriptions in Chapter 4 assume you are in
LJ4 emulation. In some cases, the SelecType setting might
function differently, depending on the emulation.
Note:
Portrait orientation is azx&ble only in LI4-GLR emulation.
GL2 MENU items
If you are not able to use your software to control parameters
such as the number of pens, pen width, and plot origin, you
can use the SelecType CL2 MEND.
Be sure to reset the printer after you have changed any setting,
otherwise the new setting will not be valid. See Chapter 4 for
details on using SelecType.
GLMODE
The GLMODE item selects the LJ4-GL2 or GL-like mode.
GLYODE= LJ4-GL2 (Default)
GL-LIKE
5-12 Using Other Printer EmuWions