Specifications

Epson ESC/P 2 and FX Emulations
The ESC/P 2 and FX em&&ions allow you to use the printer
with software that supports only Epson LQ or FX printers
without having to modify the software controlling your printer.
Operating as an LQ of Fx printer
Before you can operate the printer as an LQ or FX printer, you
need to first select the appropriate driver. For ESC/P 2
emulation, sekct one of the following drivers, which are listed
below in order of preference. If none of these drivers is
available, use any other LQ printer driver.
LQ570
LQ-510/550
LQ-500
LQ-860
LQ-850
For FX emulation, select one of the following drivers, which are
listed below in order of preference. If none of these drivers is
available, use any other FX or LX printer driver.
Fx870/1170
FX-850/1050
FX-8oo/looo
LX-100
LX-810/850
LX-800
Once you select the driver, you need to change the emulation
as described in “Changing the Emulation” earlier in this
chapter.
When you print documents formatted for dot matrix printers,
you might need to change some printer settings to account for
differences between the ActionLaser 1600 and dot matrix
5-4 U&p Other Printer Emulations