Specifications

XON/XOFF
The XON/XOFF item specifies whether the printer uses
XON/XOFF communications protocol. Check your computer
manual for the setting you should be using. If DTR is OFF,
XON/XOFF must be set to ON.
XON/XOFF=
ON (Default)
OFF
DSR
When the DSR (Data Set Ready) item is OFF, the signal level is
permanently set HIGH, allowing the printer to send data to the
computer. For most communications purposes, DSR should be
set OFF. When DSR is ON, data is sent to the computer only
when DSR is HIGH.
Check your computer manual for the setting you should be
using.
DSR= OFF (Default)
ON
TEST MENU
The items on the TEST MENU allow you to print sample pages
to test the printer or obtain information about the fonts and the
printer settings and features. To print a sample sheet, select the
item in the TEST MENU and then press the Enter button.
4-24 SelecType