Specifications

Note:
hxwasing the density increases the rate of toner consumption.
AUTO SENSE
The AUTO SENSE item specifies whether the printer can
receive data through all available interfaces or only through the
selected interface. Use AUTO SENSE to restrict use of an
interface.
AUTOSENSE=
ON (Default)
PARALLEL
SERIAL
L/T
AUX
TOP OFFSET
The TOP OFFSET item specitks in millimeters how far from
the top edge of the printable area the printer can begin printing.
The options are 0-99, adjustable in l-mm increments.
TOP OFFSET=
0 (Default)-99
LEFT OFFSET
The LEFT OFFSET item specifies in millimeters how far from
the left side of the printable area the printer can begin printing.
The options are 0-99, adjustable in l-mm increments.
LEFT OFFSET= 0 (Default)-99
SelecType 4-19