Specifications

AUTO CONT
The AUTO CONT item permits the printer to automatically
continue printing after waiting five seconds when the
PAPER SET, PRINT OVERRUN, or MEM OVERFLOW error
occurs.
When AUTO CONT is OFF, you must press the Continue
button to resume printing. In most cases, leave this option set
to OFF so you are aware of the error messages and can make
the necessary corrections. You might want to set AUTO CONT
to ON when printing long jobs or when you are away from the
printer for long periods.
AUTO CONT=
OFF (Default)
ON
STANDBY
STANDBY mode saves energy by reducing power to the
printer when it has received no data for 15 minutes. This
feature conforms to United States Environmental Protection
Agency guidelines for energy efficiency. The printer begins
warming up as soon as you send a print job or press the
On Line button; warm-up takes approximately 30 seconds.
STANDBY=
ENABLE (Default)
DISABLE
DENSITY
The DENSITY item adjusts the print density to make it darker
or lighter.
DENSITY=
DARK
DARKEST
MIDDLE (Default)
LIGHT
LIGHTEST
4-18 SelecTwe