Specifications

STD TRAY, OPT TRAY
The STD TRAY and OPT TRAY items, which are available only
if the optional lower cassette is installed, select the paper
source when the selection is not made by software.
If you do not wish one of the trays to be available as a paper
source, use LOCK. Only one paper source can be set to LOCK;
when you set one paper tray for LOCK, the other source is
automatically set to UNLOCK. For more information about
selecting the paper tray, see “selecting the Paper Source” in
chapter 2.
If both STD TRAY and OPT TRAY are set to UNLOCK (the
default), the software selects the tray based on paper
availability and size.
STD TRAY or OPT TRAY=
UNLOCK (Default)
LOCK
Note:
Any settings made from your software override the tray settings
made using the control panel.
SIZE IGNORE
When SIZE IGNORE is set to ON, the printer ignores the paper
size error (CHECK PAPER SIZE) and prints the page even if
the print data exceeds the printable area for the specified page
size. If printing exceeds the printable area, toner may smudge
on the printed sheet.
When SIZE IGNORE is OFF, the printer stops if the page size
exceeds the printable area and does a self-cleaning once it
recovers from the error.
SIZE IGNORE= OFF (Default)
ON
SelecType
4-17