Specifications

Normally, you will want to run the printer in 600-dpi mode to
take advantage of the higher resolution. However, because
300-dpi uses less memory, you may sometimes want to use the
lower resolution if you encounter memory problems.
RESOLUTION=
600 (Default)
300
TIMEOUT
The TIMEOUT item specifies how long the printer waits for
data from the active port before it terminates the print job. If
the printer waits the specified number of seconds without
receiving data, it switches automatically to another interface
port that has data ready to print. The timeout period is counted
only while the printer is on line.
TIMEOUT=
5-60 (Default)-300
EMULATION MENU
The items on the EMULATION MENU specify which
emulation to use for the parallel, serial, L/T (LocalTalk”‘), and
AUX interfaces.
PARALLEL
The PARALLEL item specifies the emulation for print jobs
coming over the parallel interface.
PARALLEL=
LJ4 (Default)
FX
ESCP2
GL2
4-14
SeZecTuve