Specifications

The LJ4 MENU configures settings that are relevant to
HP LaserJet 4 emulation, including the font source, font,
and symbol set. Usually you do not need to access the LJ4
emulation menu because most menu items are adjustable from
your software. The exception is the symbol set selection.
FONT SRC
The FONT SRC item specifies the font source.
FONT SRC=
RESIDENT (Default)
CARTRIDGE
DOWNLOAD
FONT NUMBER
The FONT NUMBER item selects a font from the selected font
source. Each font is associated with a number (the actual
number for each font differs from system to system). If you
don’t know the number of the font you want to use, you can
print a sample font sheet showing the fonts and their numbers.
See ‘TEST MENU” later in this chapter for more information.
FONT NUMBER=
0 (Default)-Available
PITCH
The PITCH item specifies the pitch of fixed-width, scalable
fonts (Courier and Let&Gothic). Pitch refers to the number of
characters that can be printed per inch. For example, if you set
the pitch to 12 cpi (characters per inch), 12 characters are
printed in one inch. Pitch can be specified from 0.44 to 99.99 cpi
in increments of 0.01 cpi.
PITCH= .44-10.00 (Default)-99.99
4-10
self?czin7e