Specifications

SelecType tutorial
This tutorial provides an example of how to use SelecType to
change the baud rate for the serial interface.
1.
2.
3.
4.
5.
6.
7.
Press the Menu button. This takes the printer off line and
displays the PRINTING MENU, which is the first menu of
the series.
Press the Menu button until SERIAL MENU appears in the
display.
Press the Item button until BAUD BATE item appears in the
display.
The display shows the current setting:
BAUD RATE= 9600 *
The asterisk indicates that 9600 is the current setting.
To change the baud rate to 19200, press the arrow button
until the display reads BAUD RATE=19200.
Press the Enter button to add the value to printer memory.
Press the On Line button to put the printer back on line.
If you see the message BESET TO SAVE, press the Reset
button while you hold down the Alt button.
4-6
SelecTuve