Specifications

To move through the menus, items, and settings in the reverse
order, hold down the Alt button and press the Menu, Item, or
arrow button.
Changing and saving SelecType settings
To change a SelecType setting, first use the Menu button to
advance to the appropriate menu, and then use the Item
button to select the item you want to change. With the item
selected, use the arrow button to change settings.
To save a new setting, press the Enter button. Then press the
On Line button to put the printer back on line. This saves the
setting and updates the printer for the new setting.
If you see the message RESET TO SAVE, the new setting
cannot be used immediately. Press the Reset button while you
hold down the Alt button until the display shows the message
RESET. The printer is then updated with the new setting.
Any SelecType settings you change remain in effect until you
again change them or until you reset all SelecType settings to
the factory defaults as described in the next section.
Resetting SelecType settings to the factory defaults
All SelecType settings have default settings that have been set
at the factory. When you change the printer settings by using
SelecType, you are overriding the factory-set defaults.
If, after you have changed SelecType settings, you wish to reset
all SelecType settings back to the factory defaults, press the
Menu button until CONFIG MENU is displayed in the control
panel. Then press the Item button until SelecType INIT is
displayed. Now press Enter. This resets the printer to the
factory defaults and erases all user-defined settings.
5elecTwe
4-5