Specifications

Caution:
Do not touch the connectors on the cartridge or in the printer’s
cartridge slot; you could damage them.
1. Make sure the printer is off or off line with the Form Feed
light off.
2. Hold the cartridge face up.
3. Insert the cartridge into the slot and press firmly until it
snaps into place.
4. Turn on the printer or set it on line. If READY appears, you
can use the font cartridge.
e
Caution:
A curt-ridge error occurred if you see one of the following
messages: REMOVE CART, ILLEGAL CART.
If the message REMOVE CART appears on the display, you
inserted the cartridge when the printer was on line or the
Form Feed light was on. If you see this message, remove the
cartridge and press Continue; then repeat steps 1 through 4.
If you see the message ILLEGAL CART, the cartridge you
installed is not compatible with the printer.
Once the cartridge is installed, select the cartridge font with
your software. If you are using Windows, follow the procedure
below. For non-Windows software, see your software manual.
1. In the Main window, double-click on the Control Panel
icon.
2. Double-click on the Printers icon.
3. In the Printers dialog box that appears, choose the Setup
button.
3-10 Fonts