Specifications

When multiple users are connected to the printer, you need to
be aware of the potential configuration and emulation conflicts
that can occur when different users have different print
requirements. The following potential conflicts can occur:
0 Users might be using different SelecType settings.
0 Users might be using different drivers and thus require
different emulations.
The conflicts occur because SelecType settings are shared by all
users of the printer, and the emulation is shared by all users of
the same interface port. Each time the SelecType settings or the
emulation is changed, other users are affected.
Sharing printer settings
If you modify printer settings from your software, the changes
affect only your print job. Except for resolution and page
protect, changes made from your software application will not
affect other users.
However, the SelecType printer settings are shared among all
users of the printer. The only SelecType settings that are not
shared among all ports are the EMULATION, PARALLEL, and
SERIAL menu settings.
If you change settings using SelecType, you also change
settings for all other users, so it’s important to keep other users
informed of the changes you make. Also, if your printout is not
what you expect, check first whether any SelecType settings
have been changed by another user.
1-12
13sino Your Fvintl?r