Specifications

Other common uses for these buttons are as follows:
Q On Line
Press to set the printer on line after you
reload paper. (The printer is off line when
the paper is out.)
P Reset
Press to stop printing or to clear remaining
data.
P Form Feed Press to print out data in the printer’s
memory. (This button ejects the page even
though the printer has not received a form
feed command.)
Changing the language of display messages
By default, the display messages are in English as are the status
sheet and font sample printouts; however, you can change the
language to any one of the following: French, German, Italian,
Spanish, Swedish, Danish, Norwegian, Dutch, Finnish, or
Portuguese.
To change the language of display messages:
1. Turn off the printer.
2. While holding down the Menu button, turn on the printer.
Do not release the Menu button until the display shows
CONFIG LANGUAGE.
3. Press the arrow button to select the language you want to use.
4. Once the language you want to use is displayed, press the
Enter button to save the new setting.
5. Hold down the Alt button and press Reset to update the
printer for the new language.
1-10
Using
Your Printer