Specifications

5. Secure the interface in the slot with the two screws attached to the
interface.
6. Connect the proper interface cable to the interface and to your
computer. Also, connect other interface cables if you are using more
than one computer with your printer. See the Read This First guide for
assistance.
7. Insert the interface cable or cables into the U-shaped part of one cable
clip. Lift the left side of the printer up slightly. Then hook the short
lip of the clip into the forward slot and push the bottom of the clip
under the printer until it clicks in place. Repeat this procedure with
the second clip and install it in the rear slot.
option lnstalllltilm C-9