Specifications

Installing the Options
If you purchased your printer and options at the same time, first set up
the printer and run the print test by following the instruction in the
Red This First guide. Then install the options.
Q
Caution:
Before installing an option, care fully read the manual that comes with the
*.
Lower Paper Cassette
The optional lower paper cassette (C812301) holds up to 250 sheets of
paper to supplement the standard tray’s W-sheet capacity.
Installing the lower paper cassette
1.
Turn off the printer. Remove any interface cables and unplug the
printer’s power cord from the electrical outlet and from the printer.
2.
Remove the optional face-up tray, if it is installed.
3.
Move the printer to one side. Place the lower cassette where your
printer normally rests, keeping the paper cassette facing you.
Q
Caution:
when lowering the printer, be sure the interface c&e is not pinched
between the printer and the lower paper cassette.
C-2 option Installation