Specifications

Function
INnlALIzE
INQUIRE
JOB
OFMSG
RDYMSG
RESET
SET
STMSG
UEL/SPJL
USTATIJS
USTATUSOFP
m
Command
@ PJL NTrALJzE [<CR>] <LF,
8 pIL INQUIRE [LPALMj variable [<CR>] <LF>
@ PJL JOB fNAME][STARTJWD][4bJ <LF>
0 PJL OFMSG DISPLAY = - [<CR>] <LF>
B FJL RDYMSG DISPLAY = - [<CR>] <Lb
0 PJL RESET [.zCb] <LP,
B PJL SET [LPARM] [<CR>] <Lb
@ PJL SThtSG DWLAY = -[<CR>] <Lb
<ESC>%-m45x
@ PJL USTATUS variable = value [<CR>] <Lb
8 PJL USTATUSOFF [<CR>] <Lb
0 FJL [<CR>] <m
You can also enter the EJL emulation from the plr emulation by
specifying EJL as the destination language of the ENTER command.
This section lists the commands for EJL (Epson Job Language). EJL can
perform the following operations in your printer
P
Switchthe printer emulation
0
Transfer the printer’s system information to the computer
P
Enter the Printer Job Language (PJL)
EJL can switch the printer emulation with a monodirectional interface, but
a bidirectional interface is required for the computer to receive system
information from the printer.
Command Summary B-27