Specifications

1.
2.
3.
4.
5.
Enter SelecType by pressing the Menu button once.
Press the Menu button until CONFIG MENU appears on
the display.
Press the item button until DENSITY appears on the display.
The DENSITY item will be shown with one of five settings:
DARK, DARKEST, MIDDLE, LIGHT, and LIGHTEST.
Press the arrow button, or AH and the arrow button together,
to select a density setting. When you have selected the
setting, press the Enter button.
Press the On Line button to put the printer back on line.
Note:
Zncreasing the print density increases toner consumption. Zfyou
select darker print, you may need to replace the imaging cartridge
more often.
Cleaning the Printer
The printer needs only minimal cleaning. If you notice a
decline in print quality, clean the glass lens and the inside of
the printer as described in this section.
You should also clean the paper feeder and the printer cover
every few months. These procedures are described later in this
section.
Whenever you clean the printer or replace the components,
print a status sheet from the TEST MENU as described in
chapter 4.
6-24 Troubleshooting and Maintenance