Specifications

STANDBY
The printer is currently in a low-power state. (When the printer
is not used for 15 minutes, it enters standby mode.) Press any
button or send data to warm up the printer. Warm-up takes
approximately 30 seconds.
TONER LOW
The printer is almost out of toner. When you see this message,
you must replace the imaging cartridge soon.
TONER OUT
You must replace the imaging cartridge. Replace it as described
in the Read This First guide.
To print one additional page, press the Continue button.
WARMINGUP
The printer is warming up. Warm-up takes approximately
30 seconds.
Data Dump Mode
Data dump mode is a special feature that makes it easy for
experienced users to find the cause of communication problems
between the printer and the computer. In data dump mode the
printer produces an exact printout in hexadecimal notation of
the codes it receives.
1.
Make sure paper is loaded and the printer is off.
6-20
Troubleshooting and h4aintenance