Specifications

PRINT OVERRUN
The required time to process the print data exceeds the print
engine speed because the current page is too complex. kess
Continue to resume printing. If this message appears again,
change the PAGE PROTECT setting in the JOB menu. See
Chapter 4, “SelecType.”
PRINTER OPEN
The printer cover is open. Close the printer cover to continue
printing.
RAM ERROR l or 2
The specified SIMM cannot be used. Remove SIMM 1 (installed
in the CN8 slot) or SIMM 2 (installed in the CN9 slot) as
appropriate. Reinstall the SIMM as described in Appendix C.
READY
The printer is ready to receive data or to print.
REMOVE CART
You may have inserted an optional font cartridge while the
Form Feed light was on. To correct the error, remove the
cartridge, reinsert it into the slot, and press the Continue
button. For information on removing and reinserting the
cartridge, see Chapter 3.
6-18
Troubleshooting and Maintenance