Specifications

EEPROM ERROR
The printer found illegal data in the EEPROM memory. Press
the Continue button to continue. You should also check that
any SelecType settings you changed from the factory defaults
are still in effect.
FEED JAM
Paper is not feeding into the printer from the specified tray or
cassette or has jammed on its way into the printer. Remove the
jammed paper and press the Continue button. See the Read
This First guide for detailed instructions.
ILLEGAL CART
The printer cannot read the font cartridge inserted. To correct
this error, turn off the printer. Then remove the cartridge as
described in Chapter 3 and reinsert it.
IMAGE OPTIMUM
There is insufficient memory to print the page using the
specified print quality. The printer automatically reduces the
print quality so it can continue printing. If the printout is not
acceptable, try simplifying the page by reducing the number of
fonts or font sizes or by switching the resolution to 300 dpi.
You may also need to increase the amount of printer memory.
See Appendix C for more information on adding memory.
Troubleshooting and Maintenance
6-15