Specifications

Option Problems
A font cannot be selected or the message REMOVE or ILLEGAL
CART appears
Turn off the printer. Then remove and carefully reinsert the
cartridge. Turn the printer back on.
Make sure the cartridge is listed in the table of available font
cartridges in Appendix C.
Paper does not feed from the optional lower paper cassette
Be sure you have selected the lower paper cassette from your
software.
The OPT TRAY setting in the SelecType CONFIG MENU may
be set to LOCK. To use the optional lower cassette, the setting
must be set to UNLOCK. See Chapter 4 for information on
using SelecType to change the OPT TRAY setting.
Check that the lower paper cassette has paper loaded. Load
paper if necessary.
Be sure that the lower paper cassette is properly installed and
that you have not tried to load it with too many sheets of
paper. The cassette can hold a maximum of 250 sheets of
75 g/m
2
(20 lb) paper.
The lower paper cassette may not be installed properly. See
Appendix C for instructions on installing the lower paper
cassette.
6-12 Troubleshooting and Maintenance