Specifications

Printed image is light or faint
Use the DENSITY item in the SelecType CONPIG MENU for
darker print.
Check the SelecType TONER item in the CONPIG MENU. If
the TONER message indicates that the amount of toner is low
(E’ F), replace the imaging cartridge as described in the Reud
This First guide.
Your paper may be moist or damp. Printing is sensitive to
moisture absorbed by the paper. The higher the moisture
content in the paper, the lighter the printed output. Do not
store your paper in a humid or damp environment.
Take out the imaging cartridge, shake it gently from side to
side to distribute the toner, and then reinstall it. If the problem
persists, replace the imaging cartridge as described in the Read
This First guide.
Image is too dark
Use the DENSITY item in the SelecType CONPIG MENU for
lighter print. If the problem persists, replace the imaging
cartridge as described in the Read This First guide.
Non-printed side of the page is dirty
Toner may have spilled in the paper feed path. Turn off the
printer. Remove the imaging cartridge and then clean the
paper path of the printer using a clean, soft, lint-free cloth.
P
Warning:
Opening the printer exposes thejimr, which is marked by a
CAUTION HOT SURFACE label. Be care&l not to touch the
w*
Troubleshooting and Maintenance
6-11