Specifications

Vertical black or white bands or lines
Turn off the printer. Remove the imaging cartridge and place it
on a clean, flat surface. Locate and clean the clear lens on the
inside middle of the printer.
Wipe the lens from end to end with a clean, soft, dry, lint-free
cloth. Then reinwrt the imaging cartridge in the printer and
close the printer cover. If the problem remains, install a new
imaging cartridge as dexribed in the Read This First guide and
print several pages to check the print quality.
Warnings
Opening the printer exposes the fuser, which is marked &IJ a
CAUTION HOT SURFACE label. Be cm@1 not to touch the
m
6-8 Troubleshooting and Maintenance