Specifications

If you are using a serial interface, make sure that both the
computer and printer are set to use the same parity, baud rate,
number of data bits, and number of stop bits.
If the printer still does not print correctly, contact your dealer
or a qualified service person
Position of the printout is not correct
Make sure that you are using the correct page length and
margin settings in your software program. Do not use
SelecType to make these settings because software settings
override SelecType.
Graphics don’t print correctly
Make sure that your software program is set for the printer
emulation you are using. For example, if you are using the LJ4
emulation, be sure that your graphics software is set for an
HP LaserJet 4 printer.
If you are using a serial interface, make sure that you set an
g-bit data word and not a 7-bit word. The data word setting is
found on the SelecType SERIAL MENU.
Graphics require large amounts of memory; if you are
encountering problems because of insufficient memory,
simplify your graphics or use fewer graphics on a page. Also
use 300-dpi resolution rather than 600-dpi resolution. If you
often print graphics-intensive pages, you may want to add
more memory as described in Appendix C.
6-6 Troubleslwotin~ and Maintenance