Specifications

LJ3 Emulation Commands
Your printer emulates the Hewlett-Packard LaserJet III printer and uses
the PCL 5 command language.
This appendix lists the available printer commands for LJ3 emulation.
Most of the commands
closely emulate the original printer or the control
language; however, some have operational differences.
The following notes apply to various command in the following.
commandsummary:
1 These commands are specific to the EPSON ActionLaser 1100.
2 Secondary printer commands are specified as secondary by using a right parenthesis")" in the
command instead of a left parenthesis.
Function
Command
Job control
Reset
ESC E
Number of ESC &/ #X
copies
universal exit ESC %- #X
language
Long-edge
ESC&/ #U
(left) offset
registration
Short-edge
ESC &/ #Z
(top) offset
registration
Page control
Paper source¹ ESC &/ OH
ESC &/ 1H
ESC &/ 2H
ESC &/ 3H
ESC &/ 6H
Parameter
Decimal value Hexadecimal value
- 027 069
X=1-99 027 038 108 #...# 088
# = 1-5
# = number of 027 038 108 #...# 085
decipoints (1/720")
# = number of 027 038 108 #...# 090
decipoints (1/720”)
Eject Page 027 038 108 048 072
Standard tray 027 038 108 049 072
Manual feed 027 038 108 050 072
Manual envelope 027 038 106 051 072
feed
Envelope feed from 027 038 108 054 072
standard tray
1B 45
1B 26 6C #...# 58
1B 26 6C #...# 55
1B 26 6C #...# 5A
1B 26 6C 30 48
1B 26 6C 31 48
1B 26 6C 32 48
1B 26 6C 33 48
1B 26 6C 36 48
C-2 Command Summary