Specifications

Power Save Mode
Specifies whether power save mode is on or off.
When Power Save Mode is on, the printer uses less
electricity by entering a low-power state when the printer
is idle for the length of time specified by Power Save
Interval. When the printer is in the low-power state, it takes
approximately 45 seconds for the printer to warm up once
it receives data.
In compliance with the Energy Star program, Power Save
Mode is factory-set to on.
Power Save Interval
Specifies how long the printer is idle before it enters power
save mode. Power Save Interval can be any value from 1 to
999 minutes. The default is 15 minutes.
Power Save Interval is valid only when Power Save Mode
is on.
Font Manager
The Font Manager, accessible by choosing the Fonts
button of the Setup dialog box, allows you to install
XL-compatible fonts to your hard disk. You need to use
Font Manager only to install PCL-compatible fonts.
2-12 Changing the Printer Settings