Specifications

96
Effect
Paper Configuration settings
The Paper Configuration settings provide a variety of menus that
are applied to printing. Click the Paper Config button to make
these settings.
Sharpness This setting provides enhanced outline to your print
data.
Soft-focus This setting makes your photos look as if they were
taken with a soft-focus lens.
Canvas This setting provides an image correction as if they
were drawn on a canvas to your print data.
Parchment This setting provides an image correction as if they
were drawn on a parchment to your print data.
None No image effect is applied.
Mode Description
Color Density Adjusts the strength of Color Density. Use a value in the
range of -50% to +50%. Drag the scroll bar to the right or
left with your mouse to adjust the setting. You can also
type a number (-50 to +50) in the box next to the slide bar.
Drying Time
per Print
Head Pass
Adjusts the Drying Time per Print Head Pass. Use a value
in the range of 0 to +50 (5.0sec), in 0.1sec increments.
Drag the scroll bar to the right or left with your mouse to
adjust the setting. You can also type a number (0 to +50)
in the box next to the slide bar.
Paper Feed
Adjustment
Adjusts the amount of Paper Feed Adjustment. Use a
value in the range of -70 to +70. The unit is mm. Drag the
scroll bar to the right or left with your mouse to adjust the
setting. You can also type a value (-70 to +70) in the box
next to the slide bar.
Paper
Thickness
Enter the Paper Thickness value in the range of 0 to +15.
You can specify a value in the range of 0 to 1.5mm, in
0.1mm increments.
Paper Suction Adjusts the Paper Suction value. You can select from
Standard (100%), -1(50%), -2(30%), -3(10%) or -4(6%).