Specifications

80
2. Press the SelecType (
r)button, then the Paper Feed ( u) or
Paper Feed (
d) button to select the language you want to
display.
3. Press the Enter button to set the language. READY (or a similar
word in the language selected) will be displayed on the LCD
panel.
Note:
It takes a while until READY is displayed.
4. To exit the maintenance mode, press the Power button to turn
off the printer.
Note:
To return to maintenance mode while an item is displayed, press the
Paper Source (
l) button.
UNIT
You can select the unit for displaying length.
1. Press the Paper Feed (
u) or Paper Feed ( d) button to select
UNIT.
2. Press the SelecType (
r)button, then the Paper Feed ( u) or
Paper Feed (
d) button to select the unit you want to display.
3. Press the Enter button to set the unit.
4. To exit the maintenance mode, press the Power button to turn
off the printer.
Note:
To return to maintenance mode while an item is displayed, press the
Paper Source (
l) button.